Road test vehicle, check ride height, check wear of all front end components, including ball joints, tie rods, struts, tires and tire pressure, control arm bushings and advise customer. Perform front end alignment
Maryland State Inspection
IMARI N. gave our service a 5 star review on 7/13/2022
Passenger car. Provide new oil filter, check and replenish all fluids to manufactures recommended specifications. Check tire pressures, lights, wipers, belts and hoses, reset oil life indicator as needed.
SCANNED COMPUTER AND FOUND B10EA, BB10E9 AND PO303 STORED IN COMPUTER. BLOWER MOTOR CONTROL CIRCUIT HIGH/LOW. THIS BLOWER MOTOR IS FAULTY & REQUIRES OEM UNIT WHICH INCLUDES BLOWER MOTOR RESISTOR. ALSO MISFIRE ON CYLINDER #3, RECOMMEND SPARK PLUG REPLACEMENT WITH 1 COIL TO ELIMINATE MISFIRE.
REAR ROTORS ARE WARPED & FRONT ARE BEGINNING TO WARP – RECOMMEND CUSTOMER RETURN TO REPAIR SHOP THAT PERFORMED THIS REPAIR FOR WARRANTY REPLACEMENT.
BLOWER MOTOR – Remove & Replace – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
Evacuate and recharge air conditioning system. Remove freon from vehicle and reinstall freon to manufactures specs. Add oil & dye to check for leaks. If air begins to blow warm – return for flourescent dye test.
Passenger car. Provide new oil filter, check and replenish all fluids to manufactures recommended specifications. Check tire pressures, lights, wipers, belts and hoses, reset oil life indicator as needed.
WIPER SWITCH – Remove & Replace – (SCCM)
TERRY T. gave our service a 5 star review on 8/10/2021